Laminate Flooring How To – Covering Concrete Stairs With Laminate

Now you have a stunning laminate flooring and also you’re wondering in the event you have to finish the concrete stairs in laminate to provide the area a cohesive, designer texture. To begin with is it all possible? Could you pay cement with laminate? The reply is yes. In fact, when you’ve covered wooden staircase, the process is equivalent, other than that the nosing setup is a little trickier.
Everything You Need
To accomplish this task you’ll want:
PL200 or more durable structure glue
Talent Found for cutting edge laminate
Chop saw for cutting metal nosings
drill using a definite piece
electrical screwdriver
plastic sticks
I would suggest using metallic nosings since these are more durable, and also certainly will hold better on cement stairs. (Laminate nosings which come from a kit can also be exacting as the tracks want to take the ideal spot, also there isn’t a lot of standardization–each and every producer creates a marginally various size/style of timber nosing) wooden stairs.
Things to Do
Start by sweeping the stairs and clean-up any shavings or dust. You are going to require a fresh surface for the glue to stick precisely into the cement and laminate. As soon as the region is clean, begin with all the risers initially.
Measure, cut and mark each laminate plank to fit the riser using the groove side facing . Glue the riser as well as the rear of the board, and then secure the plank place, making sure the groove is still in the base of the the riser. Once most of the risers are glued, then you’re all set to begin on the nosings.
Start with measuring and cutting the metallic nosings to suit. Mark in the concrete wherever the screws will goand then with a drill with a definite bit, drill the holes. Set a plastic plug in every hole. Amount the nosings so that you match each one for the tread whenever you screwnail them in later.
Measure, cut and mark each laminate plank to match the tread together with the groove side facing inwards to meet up with the base of the riser. Organizing the planks so that the groove on the riser matches the groove onto the fold makes to get a tidy, professional edge in the corner. Glue the fold and also the rear part of the board and also fasten the plank in place, ensuring that groove faces inward.
Stair nosings are intended to complete the design by capping the lip of the stair. Regrettably, with cement staircase this is sometimes described as a tiny tricky while the lip to the staircase is often thicker than the actual stair nosing. If this is actually the cut on a laminate plank so that it’s wide enough to pay the the concrete brow , and paste it to the surface of the lip on each tread. Subsequently fasten the nosing on the shirt by screwnailing it throughout the laminate drill to the pre-drilled holes from the cement. (should you’ve covered the lip-face using laminate, then you can glue the nosing to the countertop for additional adherence, then screwnail the very top of the nosing into location.)
Marion Taylor is a seasoned writer with united skills and resources together with her husband–a floor retail owner and operator–to make a series of how-to flooring videos. Their most recent attempt is that a laminate floor just how to video clip.